Pure-water pole cleaning
Deionised water and soft heads on telescopic poles, from the ground or roof, leaving no residue.
Solar panel cleaning
for your home.
Pure-water, pole-fed mechanical cleaning by trained solar technicians, with safe access planned for your roof and a visual inspection every time. Book a one-off clean or schedule it with your maintenance, whoever installed the system.
- PureWater, no chemicals or residue
- SafeAccess planned for every roof
- AnySystem, any installer
- InspectedVisual check with every clean
Pure-water cleaningDeionised, residue-free
Restored outputSoiling costs generation
Warranty-friendlyMethods manufacturers expect
ScheduledPlanned with maintenance
01. Who this page is for
Dirt is the cheapest fault
Dirt is the cheapest fault
you will ever fix.
This page is for homeowners and landlords responsible for solar panels. UK rain cleans panels to a degree, but dust, pollen, bird droppings, moss and lichen still build up, especially on low-pitch roofs, near trees and beside busy roads. The result is less electricity than your system should produce.
Mechanical cleaning feeds deionised pure water through telescopic poles with soft heads. It lifts soiling without chemicals or scratching, and leaves no residue to attract the next layer of dirt. It is the method manufacturers expect, which helps protect your warranties.
We plan safe access for every roof, from ground-level pole work to roof access with edge protection. Each clean includes a visual inspection, so we can report loose fixings, damaged panels or nesting at the same time.
- Homeowners
- Low-pitch roofs
- Homes near trees or busy roads
- Landlords and housing portfolios
02. The service
Cleaning that
Cleaning that
protects the system.
Safe access
Risk assessment, edge protection and access equipment planned for your roof before we arrive.
Inspection included
A visual check for damaged panels, loose fixings, cable wear and nesting, reported after every clean.
Scheduled programmes
Annual or seasonal cleaning, timed with planned maintenance visits and guided by monitoring data.
Bird & pest protection
Mesh and deterrents fitted where nesting under panels is a recurring problem.
Part of a maintenance plan
Cleaning sits alongside planned maintenance, monitoring and fault response in one plan.
Solar maintenance
03. How it works
From enquiry
From enquiry
to restored output.
Step 01
Tell us about the array
Its size, roof type, access and how it is performing.
Quick assessmentStep 02
Access plan & quote
A risk assessment and a fixed price for a one-off clean or a scheduled programme.
Fixed priceStep 03
Clean
Pure-water mechanical cleaning by trained technicians with safe access.
No chemicalsStep 04
Inspect & report
We report what the visual inspection found, with before and after photos.
Faults flaggedStep 05
Schedule
We plan repeat visits around your maintenance programme and monitoring data.
Ongoing
04. Free feasibility study
Book a clean
Book a clean
or a full maintenance plan.
Tell us about your array and we will quote a one-off clean or a scheduled programme combined with planned maintenance.
- Estimated system size
- Estimated bill savings
- Carbon reduction estimate
- Indicative payback
05. Cleaning FAQs
Your cleaning
Still have a question?0330 043 1047 Your cleaning
questions answered.
How often should solar panels be cleaned?
It depends on pitch, location and surroundings. Many arrays benefit from an annual clean and some need more. Monitoring data tells us when output is dropping.
Will cleaning damage the panels?
Not with the right method. We use deionised pure water and soft heads with no chemicals or pressure washing, which is what manufacturers expect.
Can you clean a system another installer fitted?
Yes. We clean, inspect and maintain systems from any installer.
Do you clean home solar panels?
Yes, from single homes to housing portfolios, with access planned safely for each roof.
Can cleaning be part of a maintenance contract?
Yes. We schedule cleaning alongside planned maintenance visits, monitoring and fault response in one operations and maintenance plan.
Do you check the panels while you clean them?
Yes. Every clean includes a visual inspection for damaged panels, loose fixings, cable wear and nesting, and we report what we find with before and after photos.
Can you stop birds nesting under my panels?
Yes. Where nesting under panels is a recurring problem, we can fit mesh and deterrents, usually at the same visit as a clean.
06. Related
More ways we
More ways we
look after your system.
Clean panels. Full
output.
Tell us about your array and we will quote a clean or a full maintenance plan.